Eco-Tuff Clearcoat Concrete Sealer and Wood Floor Sealer | Polyurethane Countertop Sealer (1 Gallon, Matte)
(as of Feb 28,2022 17:22:03 UTC – Details)
Celebrating 16 Years of Innovative Bio-Renewable Chemistry!
Bio-based ingredients that replace toxic petrochemicals with the same performance characteristics without the hazards or odor. Replaces toxins to reduce the carbon footprint. Better and safer for people, pets, and planet.
Eco-Tuff Clearcoat – High-Performance Concrete, Countertop, & Wood Sealer for an Impeccable Surface Finish
Available in Matte, Satin, & Gloss Finish
The Eco-Tuff Clearcoat is our top of the line high traffic concrete sealer and wood sealer. It is our highest solids clear coating using our bio-renewable polyurethane chemistry to deliver a non-toxic concrete and wood sealer that serves as a high-quality replacement for hazardous epoxies, acrylics, and polyurethanes.
It is known for its excellent abrasion resistance and crystal clear finish. This solvent-free bio-based chemistry can help maintain the lustre and beautiful surface finish of the substrate for years to come.
The Ideal Concrete & Wood Clear Finish Protection:
Our concrete sealer and wood sealer is formulated for new, old, or unsealed surfaces that have been properly profiled and cleaned.
Choose this clear coating if you are looking for the most durable surface protection for decorative concrete, warehouse floors, garage floors, wood floors and decks, furniture, concrete countertops, cabinets and doors.
How to Use & Apply The Concrete & Wood Coating:
Eco-Tuff is fast and easy to apply. Unlike typical sealers, it won’t leave lingering solvent odors.
Use a high-quality brush, roller, squeegee, trim pad, airless or HVLP sprayer. Apply a minimum of two coats on the surface for optimum finish. Allow 30 – 60 minutes dry time betweeen coats or until dry.
Key Features: Our polyurethane sealer will protect against moisture and common home or officechemicals Scratch, abrasion, and UV resistant. Ideal for both interior or exterior sealing projects Green Building compliant, 0 VOC emissions & toxin free for safer indoor air quality Advanced bio-renewable water-based polyurethane coating and floor sealer Typical Coverage from 300 to 400 sq.ft. per gallon depending on surface application. Solids content: 30 – 34% to deliver higher barrier protection
Eco-Poly Polyurethane Sealer & Finish Popular Uses:
Polyurethane Wood Sealer
Application on Wood Surfaces:
For best results, always prepare the wood by sanding to desired finish after repairing scratches, divots, etc. with a paintable filler. If applying over a previously installed sealer or coating other than a EcoTuff sealer, lightly sand to provide sufficient texture for improved bonding. If the coating is peeling, remove prior to application. If your wood is very porous, you may consider applying our Eco-Poly Sealer as a base coat and act as a primer to fill the pores for maximum spread rate.
Apply a minimum of two coats with a roller, squeegee, airless or HVLP sprayer. If you must use a roller, use only a low nap (1/4″) or high density foam roller applying in slow back and forth motion to avoid creating bubbles when sealing wood floors. Eco-Tuff flows smooth and will self level.
Polyurethane Concrete Sealer
Application on Concrete Surfaces:
Prepare new and unsealed concrete with Eco-Etch Pro to remove any loose finish layer and concrete dust if only applying a sealer coat. If applying over a previously stained or coated floor after 36 hours of install, lightly sand to provide sufficient texture for improved bonding. If the coating is peeling, remove prior to application. If your concrete is very porous, you may consider applying our Eco-Poly Sealer as a base coat to fill the pores for maximum spread rate.
Apply a minimum of two coats with a roller, squeegee, airless, or HVLP sprayer. If you use a roller, use (1/4″ – 3/8″) nap or high density foam roller if applying on a concrete countertop in a slow back and forth motion to avoid creating bubbles. Note: If applying on areas with vehicular or high commercial traffic, it is always advisable to remove any existing sealers before application as the new sealer will only be as strong as what it is being applied to.
Polyurethane Cabinet Sealer
Application on Cabinets & Doors:
Always prepare the surface by removing all contaminants and bond breakers. If applying over a previously installed sealer or coating other than a Eco-Poly sealer, lightly sand to provide sufficient texture for improved bonding. If the sealer is peeling, remove prior to application.
Apply a minimum of two coats with a brush, foam trim pad, high density foam roller or by HVLP sprayer. If using a high density foam roller apply in a slow back and forth motion to avoid creating bubbles. Apply sealer in thin uniform coats. Build up your coats for a more durable and beautiful finish. Always be sure the coating is dry to the touch before applying additional coats. You may accelerate dry time with forced air. .
Eco-Tuff Wood Finish
No, Bio-polyurethane No, Bio-polyurethane
Moisture, Chemical, UV Resistance
Non-Film, Penetrating Only
Interior & Exterior
30 – 35% 14 – 17% 21 – 24% 30 – 35%
0 VOC Emissions
Matte:<5GU, Satin:<25GU, Gloss:<87GU Matte:<5GU Matte:<5GU, Satin:<25GU, Gloss:<87GU Matte:<5GU, Satin:<25GU, Gloss:<87GU
OUR COMMITMENT TO SAFETY & SUSTAINABILITY:
We thoroughly evaluate and screen every raw material ingredient using a third party service partner that compares the ingredient data against the most current GreenScreen, Chemical Scorecard, and Red List Chemical databases prior to launching a product development project. Additionally, every supplier must agree to participate in our full ingredient transparency program to ensure every ingredient is measured to a minimum of 1,000 ppm and most to 100 ppm, can be validated, screened, and then submitted for USGBC LEED v4, Health Product Declaration (HPD), and other Green Building program reports.
Thank you for your trust in us and support of our continued pursuit of never ending self improvement. We always love to hear how we are doing and how we can make things better. Please let us know if we can assist you to resolve any issues you may have as we work very hard to maintain positive reviews based on consumer satisfaction.
Is Discontinued By Manufacturer : No
Package Dimensions : 7.7 x 6.8 x 6.5 inches; 8.5 Pounds
Date First Available : June 13, 2014
Manufacturer : Eco Safety Products
ASIN : B00KY30CFG
EXCELLENT SURFACE FINISH: The Eco-Tuff concrete sealer is formulated to provide a long-lasting, durable, and protective coating on concrete, wood, primed metal surfaces and more. ; well suited for interior and exterior projects.
ABRASION RESISTANCE: Formulated with bio-polyurethane, the countertop sealer provides excellent surface resistance from scratch, hot tire pick up, abrasion, water, chemicals, and UV.
EASY TO USE: This cement and wood sealer can be applied with mechanical airless or HVLP sprayers, trim pads, rollers or with a high-quality brush.
VERSATILE APPLICATIONS: Get a fine finish on concrete, masonry, wood, cement, and natural stone surfaces. It can also be used on cabinets, garage floors, doors, , manufactured products, and tiles.
NON-TOXIC, SUSTAINABLE: The gloss finish sealer is virtually odorless, non-toxic and plant-based. It is an epoxy alternative, free of off gassing and no Red List Chemicals.