QuestMark 2105 Standard Epoxy Concrete Floor Patch and Resurfacer – 5 Gallon Unit, Light Gray – Three Component 100% Solids Mortar – Fill and Repair Cracks, Holes, Pits and Spalling
(as of Feb 28,2022 18:28:11 UTC – Details)
QuestMark 2105 Standard Epoxy Concrete Floor Patch and Resurfacer is a 3 component, 100% solids epoxy mortar designed for patching and resurfacing areas where chemical resistance and a high degree of impact resistance are not needed. It has excellent wear characteristics, and is an excellent choice for walkways, loading docks, seamless floors and general patching.
It does not require a primer or topcoat to be used. The product contains no VOC content. Available in 2 sizes and 6 colors.
Directions for Use:
Clean repair area by removing all dirt, oil, dust or other debris.Ensure floor is dry prior to application.Mix Parts A and B together in an over-sized container until streak free.Add sand mixture and stir to a mortar consistency.Trowel on mixture at 1/8” to 1/4″ thickness using a hand trowel or other suitable equipment.For cleanup, use xylol or similar product.See Technical Data Sheet for cure schedule.
Indoor/Outdoor Traffic Aisles, Loading Docks, Manufacturing Plants, Warehouses Cold Storage Areas, Walkways, Cold Weather Outdoor Patching Freezers, Cold Storage Areas, Outdoor Patching in Winter Indoor/Outdoor General Patching, Walkways, Residential Indoor/Outdoor Chemical Troughs, Curbs, Tanks and Spill Areas Indoor/Outdoor Traffic Areas, Support Bases for Tanks, Cold Storage
Application Temperature Range
55°F – 90°F 30°F – 38°F -10°F – 40°F 55°F – 90°F 55°F – 90°F 30°F – 80°F
Pot Life 70°F (Useable time after mixing)
30 – 40 Minutes 10 – 15 Minutes 2 – 4 Minutes 20 – 30 Minutes 40 – 60 Minutes 8 – 15 Minutes
2 – 7 Days 2 – 7 Days 1 – 3 Days 2 – 7 Days 2 – 7 Days 2 – 5 Days
11,150 psi 7,560 psi 11,000 psi 8,400 psi 9,970 psi 8,400 psi
Good for Outdoor Use
Multiple Colors Available
Item Weight : 65 Pounds
Item model number : 2105
Date First Available : June 14, 2020
Manufacturer : CentiMark Corporation
ASIN : B08BX79C6J
This epoxy mortar provides excellent flexural, tensile, and compressive strength when patching or resurfacing concrete floors (See Specification Sheet for details).
Most effective for floors that require patching and/or resurfacing, but do not require a lot of chemical and impact resistance.
At 70 degrees F Pot life of 20-30 minutes; May be recoated in 6-7 hours; Light foot traffic in 12-14 hours; Full cure (heavy traffic) in 2-7 days
Apply to a thickness of 1/8″ to 1/4″. At this thickness, our 5 Gallon unit covers approximately 19.15 sq ft.
This system consists of resin, hardener and aggregate components. It is proudly manufactured in the USA.
Be the first to review “QuestMark 2105 Standard Epoxy Concrete Floor Patch and Resurfacer – 5 Gallon Unit, Light Gray – Three Component 100% Solids Mortar – Fill and Repair Cracks, Holes, Pits and Spalling”
There are no reviews yet.