Concrete Floor Crack Repair Kit – Ultra Low Viscosity Polymer – FLEXKIT-1200-10
(as of Mar 01,2022 15:19:08 UTC – Details)
Contractor-Grade Floor Kit
Flexomeric FLEX-1200 is a dual component, ultra low viscosity (very thin), high quality interior concrete repair polymer. Flexomeric FLEX-1200 is designed for rapidly repairing deeply spalled or damaged concrete surfaces, broken control joint walls and various cracks in concrete.
It penetrates floor cracks better than epoxy, and does not become brittle over time as epoxies do. FLEX-1200 is intended for use in damaged concrete such as overhead concrete cracks, hairline floor cracks, parking garage decks and spalls and crack in fork lift traffic areas. It is unique in that it can be used below very cold temperatures as found in cold storage warehouses or walk-in freezers. It is designed for repairing floor cracks that are hairline to wide.
Usage: Concrete floor cracks in garages, driveways, patios, broken control joints, deeply spalled or damaged control joints, and various other concrete floor crack repairs.
PROFESSIONAL GRADE KIT
Ready for the job, our kits include the same materials and method that professional contractors use. We don’t compromise on quality, so your job gets done right the first time.
What’s in the box:
1 Flexomeric FLEXTUBE-1200 Crack Injection Resin Cartridge (600ml Dual-Pack) 2 Element Static Mixer Nozzles 1 Retaining Nut 2 Pair of Gloves 1 Plastic Trowel 1 Wire Brush 1 Safety Goggles 1 Instruction Booklet
The 600ml dual-component FLEX-1200 Resin is injected into the concrete crack using a quality, dual-component injection gun.
A wire brush is required for the cleaning step of the instructions. It is used to clean away any loose concrete, paint, oil, dirt and other debri on the surface of the crack.
It is best practice to grind the length of the crack to facilitate the injection process. A dustless hand grinder is recommended to elimate compacted concrete dust.
(Not included in this kit)
Safety goggles are required to ensure eye protection during the injection process. Materials may be harmful when in direct contact with eyes.
Which Flexomeric kit do I need?
Choosing the correct Flexomeric Floor Crack Repair kit is easy.
Measure the smallest width of the crack. The injection material needs to be able to penetrate this portion of the crack to ensure that entire crack is sealed.
Use the following kits according to their corresponding measurements:
Hairline to wide: FLEXKIT-1200
3/32″ to 1/2″: FLEXKIT-1300
Hairline to 3/32″: FLEXKIT-1350
Ultra Low Viscosity Designed For Floor Cracks.
Very Rapid Set, High Strength
Deeply Penetrates Into Hairlines Cracks In Concrete Structures Better Than Epoxy
Formulated To Repair Hairline And Wider Cracks.
Gravity-Fed Injection Method